Creating a simple scrub cap sewing pattern is a straightforward project, and you can customize it to your preferred size. Below are the steps to make a basic scrub cap sewing pattern:
Materials you'll need:
- Fabric (cotton or a blend for comfort)
- Scissors
- Sewing machine
- Elastic (about 1/4 inch wide)
- Thread
- Pins
- Iron and ironing board
Here's how to make a simple scrub cap sewing pattern:
- Measure and Cut Your Fabric:
- Measure the circumference of your head where you'd like the scrub cap to sit. Add about 1-2 inches for seam allowance. This measurement will be the width of your fabric piece.
- For the length, measure from the top of your head to just above your ears. This measurement will be the length of your fabric piece. Cut a rectangle of fabric with these dimensions.
- Fold and Sew the Fabric:
- Fold the fabric in half lengthwise, with the right sides together.
- Sew along the long edge (the one that will go around your head), leaving about 1/4 inch seam allowance. You will now have a fabric tube.
- Hem the Bottom Edge:
- Fold the bottom edge of the fabric tube up by about 1/4 inch and iron it to create a crease.
- Fold it up again by about 1/4 inch to hide the raw edge and sew along this folded edge to create a hem.
- Create the Casing for Elastic:
- Fold the top edge (opposite the hem) down by about 1 inch. This is where the elastic will go, so make sure it's wide enough to accommodate the elastic.
- Sew along the folded edge, leaving a small opening to insert the elastic.
- Insert the Elastic:
- Attach a safety pin to one end of the elastic, and use it to guide the elastic through the casing you created.
- Once the elastic is through, sew the two ends of the elastic together securely, and then sew the opening in the casing closed.
- Finish the Sides:
- Fold the fabric tube in half, so the seam is on the inside.
- Sew along the side edges with about 1/4 inch seam allowance, creating a seam that goes up the side and across the top (where the elastic is).
- Trim and Turn Right Side Out:
- Trim any excess fabric and threads.
- Turn the scrub cap right side out.
- Try It On:
- Try on your scrub cap to ensure it fits comfortably. Adjust the elastic if needed.
This is a basic scrub cap pattern that you can customize by using different fabrics or adding embellishments if desired. Remember to wash and sanitize your scrub cap regularly, as they are used in healthcare settings where cleanliness is crucial.
