22+ Pajama Shorts Sewing Pattern

93 views

Creating a sewing pattern involves a series of steps and measurements. Here's a simple guide for making pajama shorts. Please note that these are general instructions, and you may need to adjust the measurements based on your preferences and body shape.

Materials:

  • Fabric of your choice (cotton is a good option for pajamas)
  • Elastic for the waistband
  • Sewing machine and basic sewing supplies
  • Paper for creating the pattern
  • Fabric marker or chalk
  • Measuring tape
  • Scissors

Instructions:

1. Take Measurements:

  • Measure your waist, hips, and the length from your waist to where you want the shorts to end.

2. Create the Pattern:

  • Draw a rectangle for the front and back panels. The width should be half of your hip measurement plus seam allowance, and the length should be the desired length of the shorts plus seam allowance.
  • Cut the rectangle in half vertically for the front and back panels.
  • For the front panel, curve the top edge for the crotch. The depth of the curve depends on personal preference but typically ranges from 1 to 2 inches.
  • For the back panel, add a slight curve to the top for a better fit.
  • Add seam allowances (usually 1/2 inch) around all edges.

3. Cut Fabric:

  • Pin your pattern to the fabric and cut out two front panels and two back panels.

4. Sew the Panels:

  • Place the front panels right sides together and sew along the curved edge. Repeat for the back panels.
  • Press the seams open.
  • Place the front and back panels right sides together, matching the side seams, and sew along the side seams.
See also  Sewing Pattern History

5. Create Waistband:

  • Measure the top edge of your shorts and cut a piece of elastic that is slightly smaller to create a snug fit.
  • Sew the ends of the elastic together to form a loop.
  • Fold the top edge of the shorts down to create a casing for the elastic. Leave a small opening to insert the elastic.
  • Thread the elastic through the casing using a safety pin.
  • Overlap the ends of the elastic and sew them together. Sew the opening in the casing closed.

6. Hem the Shorts:

  • Fold up the bottom edge of each leg and hem to your desired length.

7. Finish:

  • Give your shorts a final press, and they're ready to wear!

Feel free to customize the pattern based on your preferences, such as adding pockets or adjusting the length.