15+ Sewing Bonnet Pattern

Certainly! Here's a simple sewing pattern for a basic bonnet. You can customize it based on your preferences and fabric choices.

Materials:

• Fabric of your choice (cotton is a good option)
• Matching thread
• Sewing machine
• Scissors
• Pins
• Measuring tape
• Elastic cord

Instructions:

Step 1: Measurements

1. Head Circumference: Measure around your head where you want the bottom edge of the bonnet to sit.
2. Distance from Crown to Neck: Measure from the top of your head (crown) to the base of your neck.
3. Face Width: Measure from one side of your face, across the top of your head, to the other side.

Step 2: Cutting the Fabric

Cut the following pieces from your fabric:

1. Main Bonnet Panel (cut 2):
   • Width: Head Circumference divided by 2, plus 1 inch for seam allowance.
   • Length: Distance from Crown to Neck, plus 1 inch for seam allowance.
2. Brim Panel (cut 2):
   • Width: Face Width plus 2 inches (for a wide brim), or adjust based on your preference.
   • Length: Distance from Crown to Neck divided by 2, plus 1 inch for seam allowance.
3. Ties (cut 2):
   • Width: 4 inches
   • Length: You can customize the length based on how long you want the ties to be.

Step 3: Sewing the Bonnet

1. Assemble the Brim:
   • Sew the Brim Panels together along the curved edge, right sides facing. Trim the seam allowance.
   • Turn the brim right side out and press.
2. Attach the Main Panel:
   • Place the Main Bonnet Panels right sides together and sew along the curved edge. Trim the seam allowance and clip curves if necessary.
   • Turn the main panel right side out.
3. Attach the Brim to the Main Panel:
   • Align the raw edge of the Brim with the raw edge of the Main Panel, right sides together.
   • Sew along the edge to attach the brim to the main panel.
4. Create Ties:
   • Fold each Tie strip in half lengthwise, right sides together, and sew along the long edge. Turn them right side out.
5. Attach Ties:
   • Position the ties at each end of the bonnet, between the Main Panel and Brim, with the raw edges aligned. Sew them in place securely.
6. Add Elastic Cord (optional):
   • Measure a piece of elastic cord to fit comfortably under your chin.
   • Attach the ends of the elastic to each side of the bonnet, securing them in place with a few stitches.

Step 4: Finishing Touches

Press the seams and make sure all edges are neat. Try on the bonnet to check the fit and make any necessary adjustments. You can also embellish it with lace, ribbons, or other decorative elements based on your style.

Feel free to adapt this pattern to suit your preferences and head measurements. Happy sewing!